Hello,
So I'm thinking of buying this Harman/Kardon AVR 30 audio/video receiver, with Dolby Pro Logic, to start off my home stereo system.
I know it is a bit old, but it's at potentially a very good price and it's description seems to be well suited for a basic home stereo system. I'd just need to hunt around for suitable speakers.
What does everyone think?
thanks.
Details:
Code:
SPECIFICATIONS:
FM Section
Usable Sensitivity : MONO - 13.2dB
Quieting Sensitivity : STEREO - 38.2dB
Signal-to-Noise Ratio : STEREO - 70dB
MONO - 80dB
Capture Ratio : 1.5dB
Selectivity : ADJACENT - 5dB
Alternate Channel Selectivity : 65dB
IF Rejection : FM - 85dB
AM Rejection : 55dB
Total Harmonic Distortion : MONO - 0.2% @ 1kHz
STEREO - 0.3% @ 1kHz
Stereo Separation : 45dB
Sensitivity : EXTERNAL ANTENNA - 18 microvolts
Amplifier Section
Audio Loops : 2
Audio/Video Inputs : 4
Audio/Video Loops : 2
Preamp Outputs : Front, Center, Rear, L & R Sub
Video Outputs : 1
Power Output : STEREO - 60 watts per channel @ 6 ohms
SURROUND - FRONT L & R, CENTER 50 watts per channel @ 6 ohms
Total Harmonic Distortion : STEREO - 0.09% @ 6 ohms
SURROUND - FRONT L & R, CENTER 0.09% @ 6 ohms
SURROUND - REAR L & R 0.3%
Output 4 Ohms : SURROUND - REAR L & R 20 watts per channel
Negative Feedback : 20dB
Frequency Response : 0.5Hz - 200kHz +0/-3dB
Slew Rate : 80 v/microsecond
Rise Time : 2 microseconds
Transient Intermodulation Distortion (TIM) : Unmeasurable
Signal-to-Noise Ratio : PHONO - 78dB
CD, VIDEO, etc - 98dB
Input Impedance : PHONO - 2.5mv/47k ohms
CD, VIDEO, etc - 135mv/22k ohms
Output Level : SUBWOOFER - 2 volts/10k ohms
RIAA Equalization : +/-0.5dB
Phono Overload : 120mv
Tone Control Range (±) Bass 50Hz/Treble 10kHz: : BASS - +/-10dB @ 50Hz
TREBLE - +/-10dB @ 10kHz
Loudness Control : +10dB @ 50Hz
AM Section
Alternate Channel Selectivity : 55dB
Image Rejection : 40dB
IF Rejection : 60dB
Power Consumption : 236 watts
General
Audio Inputs : 2 line, 1 phono